Yokogawa Value Series FX1000 - Manual (Page 22)

1-13
IM 04L21B01-01EN
Overview of Functions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
Message display method
• Except for the vertical display, you can set the direction in which messages are
displayed to horizontal or vertical. For the setting procedure, see section 5.10.
• Messages can be displayed consolidated at the upper left of the screen (list
display). For the operating procedure, see section 4.2.
List display
Vertical display
• Zone Display
You can display channels in specified zones. This function can be used to keep the
waveforms from overlapping for easier view.
In the example below, channel 1 is displayed in the 0 to 30% zone, channel 2 in the
30 to 60% zone, and channel 3 in the 60 to 100% zone.
100% 0%
Channel3 Channel2 Channel1
100% 30% 0% 60%
Zone 3 Zone 2 Zone 1
Enable the
zone display.
For the setting procedure, see section 5.6.
• Partial Expanded Display
By compressing a section of the waveform display range, the rest of the section is
expanded.
In the example below, 0 V (boundary value) is moved to the 30% position of
the display range (new boundary position). The 30% area below the boundary
corresponds to “
– 6 V to 0 V” and 70% area above the boundary corresponds to “0 V
to 6 V.”
100 100 30
0
50
0 6V 6V
0
–6V –6V
0
Expanded portion
Compressed
portion
Measured value Measured value
Percentage
of display span
Percentage
of display span
Enable the partially
expanded display.
For the setting procedure, see section 5.9.
1.3 Display