Yokogawa Value Series FX1000 - Manual (Page 192)

7-3
IM 04L21B01-01EN
Customizing
Actions Using the Event
Action and
Remote Control Functions (/R1 and /PM1 Options)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
• Timer
Timer used by event action. Used also in the TLOG computation of the computation
function.
* The timer cannot be changed while memory sampling or computation is in progress.
• Timer No.
Up to four timers (1 to 4) can be set.
When Using an Absolute Timer
• Mode
Select Absolute.
• Interval
Select the interval from the available settings between 1min to 24h.
• Ref.time
Set the time in the range of hour 0 to hour 23.
When Using a Relative Timer
• Mode
Select Relative.
• Interval
Set the interval in the range of 00:01 (1 min) to 24:00 (24 hours).
• Reset at Math Start
On: Resets the timer when computation is started. The resetting of the timer is not
considered to be a timeout. Even if the timer is used as an event, the action is not
executed.
• Match Time Timer
Set the time match condition used in event action.
* The condition cannot be changed while memory sampling or computation is in progress.
• Timer number
You can set up to four match time conditions (1 to 4).
• Kind
Setting Description
Day The condition is matched once a day.
Week The condition is matched once a week.
Month The condition is matched once a month.
Set the items with check marks in the following table depending on the Kind setting.
Setup Item
Kind
Day Week Month
Day  
Day of the week 
Hour:Minute   
• Month
Specify the month.
• Day
Set the day.
• Day of the week
Set the day of the week.
• Hour:Minute
Set the time in the range of 00:00 to 23:59.
• Timer action
Settings Description
Single Executes the action once when the condition is met.
Repeat Executes the action at every specified time.
7.1 Setting the Event Action Function
(Including the remote control function of the /R1 and /PM1 options and the USER key)