Yokogawa Value Series FX1000 - Manual (Page 294)

14-7
IM 04L21B01-01EN
Setup Items
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
Meas channel > Calibration correction
Setup Item Selectable Range or Selections Default Value Setting
First-CH, Last-CH Channel number 001
Number of set points Off/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16 Off
1 to n > MES val Input (value in the measuring range)/measured value −
1 to n > True val Numerical value (measuring range) −
Math channel > Expression, Alarm
Setup Item Selectable Range or Selections Default Value Setting
First-CH, Last-CH Channel number 101
Math On/Off On/Off Off
Calculation expression 120 characters or less −
Span Lower Numerical value (–9999999 to 99999999;
decimal place: 0 to 4)
–200.00
Span Upper Numerical value (–9999999 to 99999999;
decimal place: 0 to 4)
200.00
Unit 6 characters or less −
Math alarm
1, 2, 3, 4 On/Off Off
Type H: High/L: Low/T: delay H/t: delay L −
Value Numerical value −
Relay On/Off Off
No. I01/I02/. . . /I06, I11/I12/. . . /I16 (depends on the options) I01
S01/S02/S03/. . . /S29/S30
Detect On/Off On
Math channel > Constant
Setup Item Selectable Range or Selections Default Value Setting
Number of constant Numerical value (K01 to K60) K01
Value Numerical value (–9.9999E+29 to –1.0000E–30, 0, 1
1.0000E–30 to 9.9999E+29)
Math channel > Tag, Memory, Delay
Except for the channel numbers, setup items and values are the same as those for measurement channels.
Math channel > TLOG, Rolling average
Setup Item Selectable Range or Selections Default Value Setting
First-CH, Last-CH Channel number 101
TLOG > Timer No. 1/2/3/4 1
TLOG > Sum scale Off, /s, /min, /h Off
TLOG > Reset On/Off Off
Rolling average > On/Off On/Off Off
Rolling average > Interval 1s/2s/3s/4s/5s/6s/10s/12s/15s/20s/30s/ 10s
1min/2min/3min/4min/5min/6min/10min/12min/
15min/20min/30min/1h
Rolling average > Number of samples Numerical value (1 to 1500) 1
14.1 Setting Mode Menu Map and Setup Items