Yokogawa Value Series FX1000 - Manual (Page 299)

14-12
IM 04L21B01-01EN
14.2 Basic Setting Mode Menu Map and Setup Items
Run Modes
Power on
Basic setting mode
MENU key
or ESC key
DISP/ENTER
key
DISP/ENTER
key
ESC key
Setting mode Operation mode
MENU key
MENU key
or
ESC key
Mode Transition Diagram
Operation display Setting menu display
Setup display
Basic setting
menu display
Setup display
Hold down FUNC
for 3 s
End menu > DISP/ENTER
or
ESC > DISP/ENTER
The FX has three modes.
Mode Description
Operation mode A mode for performing measurements.
Setting mode A mode for configuring settings, such as the input range and the
measurement method. Most settings can be changed when memory
sampling is in progress.
Basic setting mode A mode for configuring basic settings, such as the scan interval and
the measured data save method. You cannot switch to this mode
when memory sampling is in progress.