Yokogawa Value Series FX1000 - Manual (Page 97)

3-24 IM 04L21B01-01EN
• Timer
This sets the timer that is used in TLOG computations (this is used when you are
resetting the electric energy after the specified time has elapsed).
Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event
action > Timer.
For the timer setting procedure, see section 7.1.
• Alarm
Press MENU (to switch to setting mode), and select the Menu tab > Math channel >
Expression, Alarm.
For the computation channel setting procedure, see section 9.1.
• Constant
Press MENU (to switch to setting mode), and select the Menu tab > Math channel >
Constant.
For the computation channel setting procedure, see section 9.1.
• Report
For the report creation setting procedure, see section 9.5.
3.12 Measuring Power (/PWR1 Option)