Yokogawa Value Series FX1000 - Manual (Page 49)

1-40
IM 04L21B01-01EN
1.8 Computation and Report Functions (/M1, /PM1,
and /PWR1 Options)
Computation Function
Equations can be defined on special computation channels by using measured data,
power data, or computed data as variables. The computation channel data can be
displayed or saved.
For the setting procedure, see section 9.1.
• Channels Dedicated to Computations
Model Number of Channels Channel Numbers
FX1002 and FX1004 12 101 to 112
FX1006, FX1008, FX1010, and FX1012 24 101 to 124
• Computation Types
In the table below, [001] represents the measured value of channel 001.
Type Example Description of the Example
Four arithmetic 001+002 Determines the sum of [001] and [002].
operation
001-002 Determines the difference between [001] and [002].
001*002 Determines the product of [001] and [002].
001/002 Divides [001] by [002].
Power 001**002 Determines [001] to the power of [002]. y = X n
Square root SQR(001) Determines the square root of [001].
Absolute value ABS(001) Determines the absolute value of [001].
Common logarithm LOG(001) Determines the common logarithm of [001]. y = log 10 x
Natural logarithm LN(001) Determines the natural logarithm of [001]. y = lnx
Exponent EXP(001) Determines e to the power of [001]. y = e x
Relational 001.LT.002 The result is 1 when [001] is less than [002] or 0
computation otherwise.
001.LE.002 The result is 1 when [001] is less than equal to [002] or
0 otherwise.
001.GT.002 The result is 1 when [001] is greater than [002] or 0
otherwise.
001.GE.002 The result is 1 when [001] is greater than equal to [002]
or 0 otherwise.
001.EQ.002 The result is 1 when [001] is equal to [002] or 0
otherwise.
001.NE.002 The result is 1 when [001] is not equal to [002] or 0
otherwise.
Logical computation 001AND002 The result is 1 when [001] and [002] are nonzero or 0
otherwise.
001OR002 The result is 1 when [001] or [002] or both are nonzero
or 0 otherwise.
001XOR002 The result is 0 when [001] and [002] are nonzero or 1
otherwise.
NOT001 The result is 1 when [001] is zero or 0 otherwise.
TLOG computation* TLOG.SUM(001) Determines the sum of [001].
TLOG.MAX(001) Determines the maximum value of [001].
TLOG.MIN(001) Determines the minimum value of [001].
TLOG.AVE(001) Determines the average value of [001].
TLOG.P-P(001) Determines the difference between the maximum value
and minimum value of [001].
* See “Usage of TLOG Computations” in this section.