Yokogawa Value Series FX1000 - Manual (Page 229)

10-4
IM 04L21B01-01EN
• Execution Errors
Code Message Explanation/Countermeasures/Ref. section
150 This action is not possible because sampling is in progress. Stop the memory sampling and then execute.
See section 6.4.
151 This action is not possible during sampling or calculating. Stop the memory sampling and then execute.
See sections 6.4 and 9.4.
152 This action is not possible because saving is in progress. Wait until the saving is complete.
153 This action is not possible because formatting is in progress. Wait until the formatting is complete.
154 Message not accepted because message limit was reached. The limit is 50 messages.
See section 5.4.
155 The message is not written while sampling is stopped. Start the memory sampling and then execute.
See section 6.4.
156 There are no channels to be saved to the memory. Set the channels to be saved.
See sections 6.1 and 9.1.
157 This function is not possible at this time. Check the FX status.
158 Exceeds time deviation setting. When synchronizing the clock through remote control.
159 It is outside the postscript message write-in range. Add message can be written to the past section of the
data being memory sampled.
See section 5.4.
10.1 A List of Messages