Yokogawa Value Series FX1000 - Manual (Page 142)

5-1
IM 04L21B01-01EN
Operations for Changing the Displayed Contents
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
5.1 Setting Display Groups
Assign channels and set the group name for each display group. Set lines at specified
positions in the waveform display range on the Trend display.
Setup Screen
Press MENU (to switch to setting mode), and select the Menu tab > Group set, Trip
line.
Setup Items
• Group number
Select the target group number (1 to 10).
• Group
• On/Off
Turn On the groups you want to use.
• Group name
Set the group name. (up to 16 characters,
A a # 1
)
• CH set
Set up to six channels using the measurement channels and computation channels
(/M1, /PM1, and /PWR1 options).
• Enter the channel number using two or three digits.
• Separate each channel with a period.
• To specify a range of consecutive channels numbers, use a hyphen.
Example: To assign channels 1 and 5 to 8, enter “001.005-008.”
Note
• The trend, digital, and bar graph displays are shown in the specified order.
• A channel can be assigned to multiple groups.
• The same channel cannot be assigned multiple times in a group.
Chapter 5 Operations for Changing the Displayed Contents