Yokogawa Value Series FX1000 - Manual (Page 254)

12-5
IM 04L21B01-01EN
Installation and W
iring
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
Wiring Procedure
A terminal cover is attached to the measuring input terminal block on the rear panel. A
label indicating the terminal arrangement is affixed to the cover.
1. Turn the recorder off, and remove the terminal cover. To remove the cover, pull the
right-and-left pawls.
2. Connect the signal cables to the terminals.
Recommended torque for tightening the screws 0.5 N•m
3. Replace the terminal cover.
12.4 Input Signal Wiring