Yokogawa Value Series FX1000 - Manual (Page 265)

12-16
IM 04L21B01-01EN
Wiring Procedure
1. Turn off the FX power supply, and then remove the transparent power supply
terminal cover.
2. Connect the power cord and the protective ground cord to the power supply
terminal. Use ring-tongue crimp-on lugs (designed for 4 mm screws) with insulation
sleeves. The appropriate tightening torque for the screws is 1.4 to 1.5 N•m.
Terminal arrangement
Protective grounding cord
Power cord
Other than /P1
/P1
3. Attach the transparent power supply terminal cover.
12.6 Wiring the Power Supply