Yokogawa Value Series FX1000 - Manual (Page 133)

4-24
IM 04L21B01-01EN
Progress Display When Saving All Data of the Internal Memory
If you carry out All Save* on the memory summary screen, a pop-up window appears
showing the progress of the save operation.
* Function for saving all data in the internal memory to a CF card or USB flash memory.
Note
• The pop-up window appears only when the memory summary display is showing.
• If you press the ESC key, the pop-up window clears temporarily and reappears
approximately 10 seconds later.
• The time estimate for saving all data is indicated in the table below (when the memory is full
of data). It may take longer depending on the operating conditions of the FX.
Save Destination Time to Save All Data (Estimate)
CF Card Approximately 20 minutes
USB flash memory Approximately 40 minutes
• To abort the data saving operation in progress, carry out the procedure below.
Press
FUNC and press the Save Stop soft key.
Explanation
• Save directory
• When you have switched to data save mode from the memory summary display or
the operation selection display (see page 2-13) when a USB device is connected
to the FX, if you then try to continue saving the same file, a message asking you to
confirm that you want to overwrite the file is displayed.
• In the following situations, the FX will create a new directory to store the data in
each time you save data. Even if you save the same file, no message asking you to
confirm that you want to overwrite the file will be displayed.
If you exit data save mode and then switch back to data save mode.
If you select the save format from the sub menu without switching to data save
mode.
• The directory name structure is: Specified string_YYMMDD_HHMMSS (the values
of YY to SS are the date and time of operation).
Save directory
File list example
• Display data or event data that is in the process of adding data cannot be saved.
• The save operation explained here merely copies the data in the internal memory.
It does not save the unsaved data in the internal memory (see page 1-27).
• Data saving is aborted when there is insufficient free space on the storage medium.
Use a storage medium with sufficient free space when saving data.
4.8 Using the Memory Summary