Yokogawa Value Series FX1000 - Manual (Page 85)

3-12 IM 04L21B01-01EN
3.7 Setting Alarms on Channels
Set the alarms after setting the range. All alarm settings of a channel are cancelled in the
following cases.
* For details on the log scale (/LG1 option) alarm settings, see section 3.13, “Using the Log
Scale to Perform Measurements.”
• When the input type ( Volt, TC, etc.) is changed.
• When the input range is changed.
• When the upper or lower limit of the span or scale is changed on channels that are set
to linear scale, square root computation, or 1-5 V (including changes in the decimal
point position).
For a description of the function, see section 1.2.
Setup Screen
• Alarms for Each Channel
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Range, Alarm.
• Alarm Delay Time
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Tag, Memory, Delay.