Yokogawa Value Series FX1000 - Manual (Page 186)

6-17
IM 04L21B01-01EN
Saving and Loading Data
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
6.8 Loading and Displaying Measured Data from
External Storage Media
Load the display or event data file saved on the external storage medium and display the
waveform. The loaded data is shown on the historical trend display.
For the operations on the historical trend display, see section 4.3.
This is only valid on FXs that have a CF card slot or USB interface (/USB1 option).
Procedure
• Loading a File
1. Carry out the procedure below to show the display.
Press MENU (to switch to setting mode), and select the File tab > Load display
data or Load event data. Press the CF or USB soft key * , and then press DISP/
ENTER.
* When a CF card and a USB flash memory (/USB1 option) are being used.
2. Press the arrow keys to select a directory, and press DISP/ENTER. The files in
the directory are displayed. The root directory is denoted by [/].
3. Press the arrow keys to select a file, and press DISP/ENTER.
The file is loaded, and the waveform is displayed in the historical trend.
Note
• The extension of display data files is .DAD. The extension of event data files is .DAE.
• For details on how to use the Sort, , and soft keys, see section 6.7.