GW Instek GDS-2000A series Programming Manual - Manual (Page 110)

GDS-2000A Programming Manual
110
Reference Commands
:REF<X>:DISPlay ....................................................... 110
:REF<X>:TIMebase:POSition .................................... 110
:REF<X>:TIMebase:SCALe ........................................ 111
:REF<X>:OFFSet ........................................................ 111
:REF<x>:SCALe .......................................................... 112
:REF<X>:DISPlay
Description Sets or queries a reference waveform to be shown
on the display. A reference waveform must first be
saved before this command can be used.
Syntax :REF<x>:DISPlay { OFF| ON| ? }
Parameter <X> Reference waveform 1, 2, 3 ,4.
OFF Turns the selected reference
waveform off
ON Turns the selected reference
waveform on
Return parameter Returns the status of the selected reference
waveform. (OFF, ON)
Example :REF1:DISPlay ON
Turns on reference1 (REF 1) on the display.
:REF<X>:TIMebase:POSition
Description Sets or returns the selected reference waveform
time base position.
Syntax :REF<X>:TIMebase:POSition { <NRf> | ?}
Related
commands :REF<X>:DISPlay
Set
Query
Set
Query