GW Instek GDS-2000A series Programming Manual - Manual (Page 70)

GDS-2000A Programming Manual
70
:CURSor:XY:RECTangular:Y:POSition<X>
Description Sets or queries the vertical position in XY mode for
the Y rectangular coordinates for cursor 1 or 2.
Syntax :CURSor:XY:RECTangular:Y:POSition<X> {NRf|?}
Parameter <X> Cursor 1, 2
<NRf> Vertical position co-ordinates
Return parameter <NR3> Returns the cursor position.
Example :CURSor:XY:RECTangular:Y:POSition1 4.0E-3
Sets the Y-coordinate cursor 1 position to
40mV/mV.
:CURSor:XY:RECTangular:Y:DELta
Description Returns the delta value of cursor 1 and 2 on the Y
coordinate.
Syntax :CURSor:XY:RECTangular:Y:DELta {?}
Return Parameter <NR3> Returns the delta value of cursor 1 and 2
as <NR3>.
Example : CURSor:XY:RECTangular:Y:DELta?
80.0E-3
Returns the horizontal delta as 80mV.
:CURSor:XY:POLar:RADIUS:POSition<X>
Description Queries the polar radius position for the specified
cursor
in XY mode, where X can be either cursor 1 or
2.
Syntax :CURSor:XY:POLar:RADIUS:POSition <X>{?}
Parameter <X> 1, 2 (cursor 1, cursor 2)
Return Parameter <NR3> Returns the polar radius position.
Set
Query
Query
Query