GW Instek GDS-2000A series Programming Manual - Manual (Page 86)

GDS-2000A Programming Manual
86
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PERiod?
1.0E-3
Selects Channel 1, and then measures the period.
:MEASure:PWIDth
Description Returns the first positive pulse width.
Syntax :MEASure:PWIDth{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the positive pulse width.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PWIDth?
5.0E-6
Selects Channel 1, and then measures the positive
pulse width.
:MEASure:RISe
Description Returns the first pulse rise time.
Syntax :MEASure:RISe{?}
Related
Commands :MEASure:SOURce<X>
Query
Query