GW Instek GDS-2000A series Programming Manual - Manual (Page 242)

GDS-2000A Programming Manual
242
Syntax :SEGMents:TIMe?
Related
commands :SEGMents:STATE ； :SEGMents:CURRent
Return parameter The segment time as <NR3>.
Example :SEGMents:TIMe?
>8.040E-03
Returns the segment time.
:SEGMents:DISPALL
Description Sets or queries whether all the segments are
displayed on the screen.
Syntax :SEGMents:DISPALL {OFF|ON|?}
Related
commands :SEGMents:STATE ； :SEGMents:CURRent
Parameter/
Return parameter OFF Turns the display all function off.
ON Turns the display all function on.
Example1 :SEGMents:DISPALL ON
Turns the display all function on.
:SEGMents:MEASure:MODe
Description Sets or queries the measurement mode.
Syntax :SEGMents:MEASure:MODe {OFF|PLOT|TABle|?}
Related
commands :MEASUrement:MEAS<x>
Parameter/
Return parameter OFF Disables the automatic measurement
function for the segments
measurement.
PLOT Sets the measurement mode to
Statistics.
Set
Query
Set
Query