GW Instek GDS-2000A series Programming Manual - Manual (Page 99)

COMMAND DETAILS
99
Return parameter <NR3> Returns the delay.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
:MEASure:FFFDelay?
-8.89E-6
Select channel 1 and 2 as delay source1/2, and
then measure FFF.
:MEASure:LRRDelay
Description Returns the delay between the first rising edge of
source1 and the last rising edge of source2.
Syntax :MEASure:LRRDelay{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the delay.
Chan Off Indicates the source channel is not
activated.
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH1
:MEASure:SOURce2 CH2
: MEASure:LRRDelay?
-8.89E-6
Select channel 1 and 2 as delay source1/2, and
then measure LRR.
Query