GW Instek GDS-2000A series Programming Manual - Manual (Page 243)

COMMAND DETAILS
243
TABLE Sets the measurement mode to a
measurement list.
Example1 :SEGMents:MEASure:MODe?
>PLOT
Returns the measurement mode as Statistics.
:SEGMents:MEASure:PLOT:SOURce
Description Sets or queries the statistics source.
Syntax :SEGMents:MEASure:PLOT:SOURce {<NR1> | ? |}
Related
commands :SEGMents:MEASure:MODe ; :SEGMents:MEASure:P
LOT:DIVide ; :SEGMents:MEASure:PLOT:SELect ; :SE
GMents:MEASure:PLOT:RESults
Parameter/
Return parameter <NR1> 1~8 (Automatic measurement item
1~8)
Example1 :SEGMents:MEASure:PLOT:SOURce 1
Sets the source as auto measurement item 1.
:SEGMents:MEASure:PLOT:DIVide
Description Sets or queries the number of bins for the statistics
function.
Syntax :SEGMents:MEASure:PLOT:DIVide {<NR1> | ? |}
Related
commands :SEGMents:MEASure:PLOT:SOURce ; :SEGMents:ME
ASure:PLOT:SELect
Parameter/
Return parameter <NR1> 1~20
Example1 :SEGMents:MEASure:PLOT:DIVide 5
Sets the number bins to 5 for the statistics function.
Set
Query
Set
Query