GW Instek GDS-2000A series Programming Manual - Manual (Page 251)

COMMAND DETAILS
251
Parameter
<x> Module 1 or 2.
<NRf> The frequency of the function
generator in Hz. (0.1 ~ 5000000)
Return parameter Returns the frequency of the function generator
function in <NR3> format.
Example :FUNCtion1:FREQuency 1000
Sets the function generator frequency to 1kHz for
the function generator in module slot 1.
:FUNCtion<x>:AMPlitude
Description Sets or queries the function generator amplitude.
Syntax :FUNCtion<x>:AMPlitude {<NRf>|?}
Related
commands :FUNCtion<x>:MODe
Parameter
<x> Module 1 or 2.
<NRf> The amplitude of the waveform in
volts.
Return parameter Returns the amplitude of the function generator
function in <NR3> format.
Example :FUNCtion1:AMPlitude 2.00
Sets the function generator amplitude to 2.00 Vpp.
:FUNCtion<x>:OFFSet
Description Sets or queries the function generator DC offset.
Syntax :FUNCtion<x>:OFFSet {<NRf>|?}
Related
commands :FUNCtion<x>:MODe
Parameter
<x> Module 1 or 2.
<NRf> (-1 ~ +1) The offset of the waveform
in volts.
Set
Query
Set
Query