GW Instek GDS-2000A series Programming Manual - Manual (Page 91)

COMMAND DETAILS
91
Return parameter <NR3> Returns the amplitude.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:AMPlitude?
3.76E-3
Selects Channel 1, and then measures the
amplitude.
:MEASure:MEAN
Description Returns the mean voltage/current of one or more
full periods.
Syntax :MEASure:MEAN{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the mean.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:MEAN?
1.82E-3
Selects Channel 1, and then measures the mean
value.
:MEASure:CMEan
Description Returns the mean voltage/current of one full
period.
Query
Query