GW Instek GDS-2000A series Programming Manual - Manual (Page 250)

GDS-2000A Programming Manual
250
Function Generator Commands
The function generator commands are only available when the DS2-
FGN option is installed.
:FUNCtion<x>:MODe ................................................ 250
:FUNCtion<x>:FREQuency ........................................ 250
:FUNCtion<x>:AMPlitude ......................................... 251
:FUNCtion<x>:OFFSet .............................................. 251
:FUNCtion<x>:DUTYcycle ......................................... 252
:FUNCtion<x>:MODe
Description Sets or queries the function generator mode.
Syntax :FUNCtion<x>:MODe {SINE|SQUAre|TRIAngle|?}
Related
commands :FUNCtion<x>:FREQuency ; :FUNCtion<x>:AMPlitude
:FUNCtion<x>:OFFSet ; :FUNCtion<x>:DUTYcycle
Parameter/
Return parameter <x> Module 1 or 2.
SINE Sets the function generator to Sine
SQUAre Sets the function generator to Square
TRIAngle Sets the function generator to
Triangle
Example :FUNCtion1:MODe SINE
Sets the function generator mode to Sine for the
function generator in module slot 1.
:FUNCtion<x>:FREQuency
Description Sets or queries the function generator frequency.
Syntax :FUNCtion<x>:FREQuency {<NRf>|?}
Related
commands :FUNCtion<x>:MODe
Set
Query
Set
Query