GW Instek GDS-2000A series Programming Manual - Manual (Page 179)

COMMAND DETAILS
179
:BUS1:PARallel:WIDth
Description Sets or queries the number of bits for the parallel
bus.
Syntax :BUS1:PARallel:WIDth {<NR1> | ? }
Parameter/Return
parameter <NR1> 1~16
Example :BUS1:PARallel:WIDth 16
Sets the width of the bus to 16 bits.
:BUS1:DISplay:FORMAt
Description Sets or queries the display format for the bus,
either binary or hexadecimal.
Syntax :BUS1:DISplay:FORMAt { BINary | HEXadecimal | ? }
Parameter/Return
parameter BINary Binary format
HEXadecimal Hexadecimal format
Example : BUS1:DISplay:FORMAt BINary
Sets the display format to binary.
:LISTer:DATA
Description Returns the Event Table data as a binary block
data.
Syntax :LISTer:DATA?
Return Parameter Returns the event table as binary block data. The
binary block data contains comma separated data with
new lines at the end of each row.
Set
Query
Set
Query
Query