GW Instek GDS-2000A series Programming Manual - Manual (Page 156)

GDS-2000A Programming Manual
156
Example :TRIGger:BUS:B1:LIN:CONDition?
>IDANDDATA
:TRIGger:BUS:B1:LIN:CONDition DATA
:TRIGger:BUS:B1:LIN:CONDition?
>DATA
:TRIGger:BUS:B1:LIN:DATa:QUALifier
Description Sets or returns the LIN data qualifier.
Note: Only applicable when the trigger condition
is set to DATA or IDANDDATA.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :TRIGger:BUS:B1:LIN:DATa:QUALifier
{LESSthan|THAN|EQual|UNEQual|LESSEQual|MORE
EQual|?}
Parameter/
Return parameter LESSthan Triggers when the data is less than
the qualifier value.
THAN Triggers when the data is greater than
the qualifier value.
EQual Triggers when the data is equal to the
qualifier value.
UNEQual Triggers when the data is not equal to
the qualifier value.
LESSEQual Triggers when the data is less than or
equal to the qualifier value.
MOREEQual Triggers when the data is more than
or equal to the qualifier value.
LESSthan Triggers when the data is less than
the qualifier value.
Set
Query