GW Instek GDS-2000A series Programming Manual - Manual (Page 248)

GDS-2000A Programming Manual
248
DVM Commands
The DVM commands are only available when the optional DVM
software is installed.
:DVM:STATE .............................................................. 248
:DVM:SOURce ........................................................... 248
:DVM:MODe .............................................................. 249
:DVM:STATE
Description Sets or queries the DVM state to on or off.
Syntax :DVM:STATE {OFF | ON | ? }
Related
commands :DVM:SOURce ; :DVM:MODe
Parameter/
Return parameter OFF Turns the DVM off.
ON Turns the DVM on.
Example :DVM:STATE ON
Turns the DVM state on.
:DVM:SOURce
Description Sets or queries the source of the DVM.
Syntax :DVM:SOURce {CH1|CH2|CH3|CH4|?}
Related
commands :DVM:SOURce ; :DVM:MODe
Parameter/
Return parameter CH1~CH4 Channel 1 to 4.
Example :DVM:SOURce CH1
Sets the DVM source to channel 1.
Set
Query
Set
Query