GW Instek GDS-2000A series Programming Manual - Manual (Page 155)

COMMAND DETAILS
155
String contents:
x = don’t care
1 = binary 1
0 = binary 0
Example :TRIGger:BUS:B1:CAN:DATa:SIZe 1
:TRIGger:BUS:B1:CAN:DATa:VALue "01010X1X"
:TRIGger:BUS:B1:CAN:DATa:VALue?
>01010X1X
:TRIGger:BUS:B1:LIN:CONDition
Description Sets or returns the LIN trigger condition.
Requirements: Firmware version V1.19 or later with
DS2-LA8 (or DS2-LA16).
Syntax :TRIGger:BUS:B1:LIN:CONDition
{{SYNCField|IDentifier|DATA|IDANDDATA|WAKEup|S
LEEP|ERRor|?}
Parameter/
Return parameter SYNCField Sets the LIN trigger condition to the
sync field.
IDentifier Sets the LIN trigger condition to
identifier field.
DATA Sets the LIN trigger condition to the
data field.
IDANDDATA Sets the LIN trigger condition to
identifier and data field
WAKEup Sets the LIN trigger condition to wake
up.
SLEEP Sets the LIN trigger condition to
sleep.
ERRor Sets the LIN trigger condition to
error.
Set
Query