GW Instek GDS-2000A series Programming Manual - Manual (Page 259)

COMMAND DETAILS
259
Data Logging Commands
The data logging commands are only available when the Datalog
App is installed and the DS2-LAN option is installed. Note all data
logging commands are only available for firmware V1.18 or above.
:DATALOG:STATE .....................................................259
:DATALOG:SOURce ..................................................259
:DATALOG:SAVe .......................................................260
:DATALOG:INTerval ..................................................261
:DATALOG:DURation ................................................261
:DATALOG:STATE
Description Sets or queries the state of the data logging app.
Syntax :DATALOG:STATE{OFF|ON|?}
Related
commands :DATALOG:SOURce
:DATALOG:SAVe
:DATALOG:INTerval
:DATALOG:DURation
Parameter/
Return parameter OFF Turns the data logging off.
ON Turns the data logging on.
Example :DATALOG:STATE ON
Turns the data logging app on.
:DATALOG:SOURce
Description Sets or queries the data logging source channel.
Syntax :DATALOG:SOURce {CH1~CH4|D0~D15|all|?}
Set
Query
Set
Query