GW Instek GDS-2000A series Programming Manual - Manual (Page 88)

GDS-2000A Programming Manual
88
Syntax :MEASure:RPReshoot{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the rising preshoot.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:RPReshoot?
2.13E-2
Selects Channel 1, and then measures the rise
preshoot.
:MEASure:PPULSE
Description Returns the number of positive pulses.
Syntax :MEASure:PPULSE{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the number of positive pulses.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PPULSE?
6.000E+00
Selects Channel 1, and then measures the number
of positive pulses.
Query