GW Instek GDS-2000A series Programming Manual - Manual (Page 134)

GDS-2000A Programming Manual
134
:TRIGger:EXTERnal:PROBe:TYPe
Description Sets or queries the external probe type.
Syntax :TRIGger:EXTERnal:PROBe:TYPe { VOLTage | CURRent
| ? }
Related
commands :TRIGger:EXTERnal:PROBe:RATio
Parameter VOLTage Voltage
CURRent Current
Return parameter Returns the probe type.
Example :TRIGger:EXTERnal:PROBe:TYPe?
CURRENT
:TRIGger:EXTERnal:PROBe:RATio
Description Sets or queries the external probe ratio
(attenuation).
Syntax :TRIGger:EXTERnal:PROBe:RATio {<NRf> | ?}
Related
commands :TRIGger:EXTERnal:PROBe:TYPe
Parameter <NRf> External probe attenuation factor.
Return parameter <NR3> Returns the probe attenuation factor.
Example :TRIGger:EXTERnal:PROBe:RATio?
5.000000e+01
:TRIGger:BUS:TYPe
Description Returns the current bus type.
Syntax :TRIGger:BUS:TYPe?
Return parameter 12C I2C mode
Set
Query
Set
Query
Query