GW Instek GDS-2000A series Programming Manual - Manual (Page 87)

COMMAND DETAILS
87
Return parameter <NR3> Returns the rise time.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:RISe?
8.5E-6
Selects Channel 1, and then measures the rise time.
:MEASure:ROVShoot
Description Returns the rising overshoot over the entire
waveform in percentage.
Syntax :MEASure:ROVShoot{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the overshoot.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:ROVShoot?
5.00E+00
Selects Channel 1, and then measures the rise
overshoot.
:MEASure:RPReshoot
Description Returns rising preshoot over the entire waveform
in percentage.
Query
Query