GW Instek GDS-2000A series Programming Manual - Manual (Page 190)

GDS-2000A Programming Manual
190
RISEFall Rise and Fall trigger
LOGic Logic trigger
BUS Bus trigger
Example :SEARCH:TRIGger:TYPe EDGE
Sets the search trigger to the edge type.
:SEARCH:TRIGger:SOURce
Description Sets or queries the search trigger source.
Syntax :SEARCH:TRIGger:SOURce {CH1 | CH2 | CH3 | CH4 |
D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 |
D11 | D12 | D13 | D14 | D15 | ? }
Parameter/Return
parameter CH1 to CH4 Channel 1 to Channel 4
D0 to D15 Digital channels D0 to D15
Example :SEARCH:TRIGger:SOURce CH1
Sets the search trigger source as CH1.
:SEARCH:TRIGger:EDGE:SLOP
Description Sets or queries the search trigger slope.
Syntax :SEARCH:TRIGger:EDGe:SLOP { RISe | FALL | EITher
| ? }
Related
commands :SEARCH:TRIGger:TYPe
Parameter RISe Rising slope
FALL Falling slope
EITher Either rising or falling slope
Return parameter Returns the trigger slope.
Example :SEARCH:TRIGger:EDGe:SLOP FALL
Sets the search trigger slope to falling.
Set
Query
Set
Query