GW Instek GDS-2000A series Programming Manual - Manual (Page 89)

COMMAND DETAILS
89
:MEASure:NPULSE
Description Returns the number of negative pulses.
Syntax :MEASure:NPULSE{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the number of negative pulses.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:NPULSE?
4.000E+00
Selects Channel 1, and then measures the number
of negative pulses.
:MEASure:PEDGE
Description Returns the number of positive edges.
Syntax :MEASure:PEDGE{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the number of positive edges.
Chan Off Indicates the source channel is not
activated.
Query
Query