GW Instek GDS-2000A series Programming Manual - Manual (Page 93)

COMMAND DETAILS
93
:MEASure:LOW
Description Returns the low voltage/current.
Syntax :MEASure:LOW{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the global low value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:LOW?
1.00E-0
Selects Channel 1, and then measures the low
current/voltage.
:MEASure:MAX
Description Returns the maximum amplitude.
Syntax :MEASure:MAX{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the maximum amplitude.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Query
Query