GW Instek GDS-2000A series Programming Manual - Manual (Page 223)

COMMAND DETAILS
223
Digital Commands
The digital commands are only available when the DS2-8LA or DS2-
16LA option is installed.
:D<X>:DISPlay ...........................................................223
:D<X>:POSition .........................................................223
:DISPlay:DIGital:HEIght ............................................224
:DIGital:GROUP<X>:THREshold ..............................224
:DIGital:ANAlog:A<X>:DISPlay .................................225
:DIGital:ANAlog:A<X>:RATio ....................................226
:D<x>:MEMory ...........................................................226
:D<x>:LMEMory .........................................................227
:DIGital:MEMory ........................................................228
:DIGital:LMEMory ......................................................228
:D<X>:DISPlay
Description Turns the selected digital channel on or off or
queries its status.
Syntax :D<X>:DISPlay { OFF | ON | ? }
Parameter/
Return parameter <X> Digital channel number D(0 to 15).
OFF Turns the selected digital channel off.
ON Turns the selected digital channel on.
Example :D0:DISPlay ON
Turns D0 on.
:D<X>:POSition
Description Sets or returns the position of the selected digital
channel.
Syntax :D<X>:POSition { <NRf> | ? }
Set
Query
Set
Query