GW Instek GDS-2000A series Programming Manual - Manual (Page 45)

COMMAND DETAILS
45
:ACQuire<X>:LMEMory?
Description Returns the data in acquisition memory for the
selected channel as a header + raw data. This is
the equivalent to the Detail LM format.
Syntax :ACQuire<X>:LMEMory?
Related
Commands :ACQuire:RECOrdlength
:HEADer
Parameter <X> Channel number (1 to 4)
Example :ACQuire1:LMEMory?
Format,2.0A,Memory
Length,1000000,IntpDistance,0,Trigger
Address,2499,Trigger Level,9.400E-
02,Source,CH1,Vertical Units,V,Vertical Units
Div,0,Vertical Units Extend Div,13,Label,;Probe
Type,0,Probe,1.000E+00,Vertical Scale,5.000E-02,Vertical
Position,-9.400E-02,Horizontal Units,S,Horizontal
Scale,2.000E-04,Horizontal
Position,0.000E+00,Horizontal Mode,Main,SincET
Mode,Real Time,Sampling Period,2.000E-09,Horizontal
Old Scale,2.000E-04,Horizontal Old
Position,0.000E+00,Firmware,V0.99.03,Time,19-Sep-12
10:40:10,Waveform Data;<LF>#72000000<Raw
Data><LF>
:ACQuire<X>:STATe?
Description Returns the status of waveform data.
Syntax :ACQuire<X>:STATe?
Parameter <X> Channel number (1 to 4)
Return parameter 0 Raw data is not ready
1 Raw data is ready
Query
Query