GW Instek GDS-2000A series Programming Manual - Manual (Page 230)

GDS-2000A Programming Manual
230
Label Commands
The commands, “:BUS1:LABel”, “:BUS1:LABel:DISPlay”,
“:D<X>:LABel”, “:D<X>:LABel:DISPlay”,
“DIGital:ANAlog:A<X>:LABel” and “DIGital:ANAlog:A<X>:LABel”
are only available when the DS2-8LA or DS2-16LA option is
installed.
:CHANnel<X>:LABel .................................................. 230
:CHANnel<X>:LABel:DISPlay .................................... 231
:REF<X>:LABel ........................................................... 232
:REF<X>:LABel:DISPlay ............................................. 232
:BUS1:LABel ............................................................... 233
:BUS1:LABel:DISPlay ................................................. 234
:D<X>:LABel............................................................... 234
:D<X>:LABel:DISPlay ................................................. 235
:DIGital:ANAlog:A<X>:LABel .................................... 236
:DIGital:ANAlog:A<X>:LABel:DISPlay ....................... 237
:SET<X>:LABel ........................................................... 237
:CHANnel<X>:LABel
Description Sets or returns the file label for the selected
channel.
Syntax :CHANnel<X>:LABel {<string> | ?}
Related
commands :CHANnel<X>:LABel:DISPlay
Parameter <X> Channel 1, ,2, 3, 4
<string> The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, “string”.
Set
Query