GW Instek GDS-2000A series Programming Manual - Manual (Page 261)

COMMAND DETAILS
261
:DATALOG:INTerval
Description Sets or queries the recording interval time in
seconds. The interval times that can be set are
dependent on the settings of the
DATALOG:SOURCE and DATALOG:SAVE
commands.
Syntax :DATALOG:INTerval {<NR1>|?}
Related
commands :DATALOG:STATE
:DATALOG:SOURce
:DATALOG:SAVe
:DATALOG:DURation
Parameter/Return
parameter <NR1> Sets returns the interval time in
discrete seconds:
Interval time for DATALOG:SOURCE
= All or DATALOG:SAVE=IMAGE:
5, 10, 15, 20, 25, 30, 35, 60, 120
Interval time for DATALOG:SOURCE
= CH1~CH4 or D0 ~ D15: 2, 3, 4, 5, 10,
20, 30, 60, 120
Example :DATALOG:INTerval 5
Sets the recording interval to 5 seconds.
:DATALOG:DURation
Description Sets or queries the recording duration time in
minutes.
Syntax :DATALOG:DURation {<NR1>|?}
Related
commands :DATALOG:STATE
:DATALOG:SOURce
:DATALOG:SAVe
:DATALOG:INTerval
Set
Query
Set
Query