GW Instek GDS-2000A series Programming Manual - Manual (Page 52)

GDS-2000A Programming Manual
52
:CHANnel<X>:INVert
Description Inverts a channel or returns its status.
Syntax :CHANnel<X>:INVert {OFF | ON | ?}
Parameter <X> Channel 1, 2, 3, 4
OFF Invert off
ON Invert on
Return parameter ON Invert on
OFF Invert off
Example :CHANnel1:INVert ON
Inverts Channel 1
:CHANnel<X>:POSition
Description Sets or returns the position level for a channel.
Note The vertical position will only be set to closest
allowed value. The position level range depends
on the vertical scale.
The scale must first be set before the position can
be set.
Syntax :CHANnel<X>:POSition { <NRf> | ?}
Parameter <X> Channel 1, 2, 3, 4
<NRf> Position. Range depends on the vertical
scale.
Return parameter <NR3> Returns the position value.
Example 1 :CHANnel1:POSition 2.4E–3
Sets the Channel 1 position to 2.4mV/mA
Example 2 :CHAN nel1:POSition?
2.4E-3
Returns 2.4mV as the vertical position.
Set
Query
Set
Query