GW Instek GDS-2000A series Programming Manual - Manual (Page 49)

COMMAND DETAILS
49
Vertical Commands
:CHANnel<X>:BWLimit .............................................. 49
:CHANnel<X>:COUPling ............................................ 50
:CHANnel<X>:DESKew .............................................. 50
:CHANnel<X>:DISPlay ............................................... 50
:CHANnel<X>:EXPand ................................................51
:CHANnel<X>:IMPedance? .........................................51
:CHANnel<X>:INVert ................................................. 52
:CHANnel<X>:POSition ............................................. 52
:CHANnel<X>:PROBe:RATio ..................................... 53
:CHANnel<X>:PROBe:TYPe ....................................... 53
:CHANnel<X>:SCALe ................................................. 53
:CHANnel<X>:BWLimit
Description Sets or returns the bandwidth limit on/off.
Syntax :CHANnel<X>:BWLimit {FULL | <NR3> | ?}
Parameter <X> Channel 1,2,3,4
FULL Full bandwidth
<NR3> Sets the bandwidth limit to a pre-defined
bandwidth.
200E+6: 200MHz
100E+6: 100MHz
20E+6: 20MHz
Return Parameter <NR3> Returns the bandwidth.
Full Full bandwidth
Example :CHANnel1:BWLimit 2.000E+07
Sets the channel 1 bandwidth 20MHz
Set
Query