GW Instek GDS-2000A series Programming Manual - Manual (Page 43)

COMMAND DETAILS
43
Acquisition Commands
:ACQuire:AVERage ...................................................... 43
:ACQuire:MODe ......................................................... 43
:ACQuire<X>:MEMory? .............................................. 44
:ACQuire<X>:LMEMory? ............................................ 45
:ACQuire<X>:STATe? .................................................. 45
:ACQuire:INTERpolation ............................................ 46
:ACQuire:FILTer .......................................................... 46
:ACQuire:RECOrdlength ............................................. 46
:HEADer ...................................................................... 47
:ACQuire:AVERage
Description Selects or returns the number of waveform
acquisitions that are averaged in the average
acquisition mode.
Syntax :ACQuire:AVERage {<NR1>| ?}
Related
Commands :ACQuire:MODe
Parameter <NR1> 2, 4, 8 ,16, 32, 64, 128, 256
Note Before using this command, select the average
acquisition mode. See the example below.
Example :ACQuire:MODe AVERage
:ACQuire:AVERage 2
Selects the average acquisition mode, and sets the
average number to 2.
:ACQuire:MODe
Description Selects or returns the acquisition mode.
Syntax :ACQuire:MODe {SAMPle | PDETect | AVERage | ?}
Set
Query
Set
Query