GW Instek GDS-2000A series Programming Manual - Manual (Page 85)

COMMAND DETAILS
85
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:NWIDth?
4.995E-04
Selects Channel 1, and then measures the negative
pulse width.
:MEASure:PDUTy
Description Returns the positive duty cycle ratio as percentage.
Syntax :MEASure:PDUTy{?}
Related
commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the positive duty ratio.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PDUTy?
5.000E+01
Selects Channel 1, and then measures the positive
duty cycle.
:MEASure:PERiod
Description Returns the period.
Syntax :MEASure:PERiod{?}
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the period.
Query
Query