2N Lift8 v1.0 User Manual
Page 110
110
After the application is launched, a splashscreen gets displayed informing you of the
application manufacturer and current version. Start it to display the basic login screen
and Log in to server menu. Find a clear tree-structured list of all configured
connections to your
to the left. If you have installed the application
2N Lift8 Servers
®
for the first time, the default connection will be created automatically. This connection
cannot be removed. If you use one and the same PC for your 2N Lift8 Control
®
and server, you can make use of these pre-settings and click the Connect icon.
Panel
The
will log in to the local server. You need not use the
2N Lift8 Control Panel
®
pre-set values but can create a connection of your own using the New server and New
group buttons. Create a tree structure of your own and save the settings by login to
the server. Select a connection and push Delete selected to remove a connection. It is
easy to set the connection: all you have to do is enter the connection name and insert
the local loop address 127.0.0.1 or the localhost text (only if the server is running
locally) in the server address. Enter the IP address of the LAN or public network server
to get connected to another server. Use the DNS server if available. Enter the listening
port selected during the
installation into the Port parameter. The
2N Lift8 Server
®
default port value is 7008. Contact your LAN administrator to verify the settings. Refer
to the figure below for possible settings.
Server Connection Screen
Figure:
Now select the server connection and press Connect or double-click the selected server
with the left button. The application will execute login to the
.
2N Lift8 Server
®