Logs - advanced settings – 2N Lift8 v1.0 User Manual
Page 95
95
Logs Menu
Figure:
You can save the log into a file for later analysis in the lower part of the screen. Click
Find to search the log for a message. Enter the string (word) to be found lift and press
Filter once to find the first string occurrence. Click Find next to find the other string
occurrence. Use the Advanced settings to enable/disable log types and use colour
marking for convenience. The Advanced settings also provide additional options; see
below.
Logs - Advanced Settings
Find the advanced settings in a hideable form to the right. The first parameter is
the Use own colours checkbox, which activates the user background colour settings for
the log groups lower in the menu. The change is visible immediately upon checking.
The next parameter controls visibility of levels. Use the checkbox next the log level to
select whether or not the log shall be displayed in the overview. Use the Group
background colours table to set the user colours to the log groups and, again, the
visibility parameter. You can use the time filter to find the required logs. Just set the
start and end time or date of the log to be displayed without searching the whole log
file. Enable this setting by the checkbox at the Use time filter parameter. Now arrange
the date and time information: use the default date/time arrangement or set an order
of your own. Doing this, you have to use all the dd.MM.yyyy HH.mm.ss.fff data but can
arrange them as you want. Automatic refresh is the last advanced setting: set the time
interval in seconds and specify in the checkbox below the main table whether or not
the display shall be shifted automatically to make the last (most recent) log row visible.
Tip
Charge duly trained persons or ask your Technical Support staff to analyse
.
the logs