2N Lift8 v1.0 User Manual
Page 69
69
996
Configuration
Fireman
solution
XY
empty
Format XY
X = indicates the number
of the shaft which is
configured on the cabin
announcer of type
FirePlace (1-8)
Y = indicates whether it is
activated by a button (0,
first press activates,
second press switches off),
or by key (1)
800
Time
configuration
hhmm
Reads the current
configuration of time, new
one can be configured.
801
Configuration
of date
RRMMDD
Reads the current
configuration of date, new
one can be configured.
898
Cancellation of
working
configuration
Cancels changes
performed during this
configuration call; does
not cancel performed
change of date and time! -
must be confirmed by
asterisk
899
Complete
reinitialisation
(including
servicing
password!)
It is necessary to enter the
valid servicing password
again (this is a protection
against unwanted deletion
during incorrect
1001
Permit data
0 - 1
0
The parameter permits the
use of GSM/UMTS
connection of the module
to the data network of the
operator. *
1002
APN
Serves for the
configuration of the access
APN server of the mobile
operator. *
1003
Login
Configures the username
for authentication in APN
server of operator. *
1004
Password
Configures password for
authorisation in APN
server of operator. *
* This parameter can be configured only via the service tool
Caution
The parameters 1003 and 1004 serve for a configuration of the username
and password for verification at the operator. Most operators do not use
any verification. If the your operator requires verification, it must give you
the necessary access data.