2N Lift8 v1.0 User Manual
Page 121
121
Lifts - Basic Menu
Figure:
The Check call intervals parameter specifies the timeout during which the lift has to call
the
. As the maximum value is entered, the lift may call earlier but
2N Lift8
®
Server
not later. If the time interval exceeds the set limit, the lift will be designated as
defective. The defect marking will be removed when another check or alarm call comes
to the server from this lift. Define the processing method for alarm calls in the
Response type:
,
and
Do the same in the Response
Normal call Confirm with 1
CPC.
type for check calls where the following options are available:
,
Reject Answer and
,
,
or
. Click Save to confirm the settings.
send 5 Confirm with 1 and 5 CPC
P100
Users
Like with groups, the Users menu displays the list of all the users who are authorised
to view or administer the selected lift. The default Administrator, who may administer
all lifts, users and roles, is not listed. Select a user from the list of available users and
click Add user to add a the user to the list. Click Delete at a user to remove the user
from the user list. Click Save for confirmation.