2N Lift8 v1.0 User Manual
Page 124
124
Lifts - Map Menu
Figure:
Building Plan
When you have set the storage and added and configured the plan in the Basic menu,
the plan will get displayed in the Building Plan menu. Use the scroll bars to find the lift
installation site and place the lift on the map using the left button. The default position
of the lift in a new plan is in the left-hand upper corner. The plan also displays the
other lifts in the building. The lift state is signalled by three colours: orange means a
lift that is being configured, green represents another working lift and red means a
defective lift whose check call timeout has elapsed. A phone number is specified for
each lift too. Change the lift plan in the Available plans column and click Save to
confirm the new settings.