Before you start, Mounting, Electrical installation – 2N Lift8 v1.0 User Manual
Page 50
50
5. The lighting of the button ALARM (not required by a standard) makes it possible
to find the announcer easily in the dark and to activate it.
Before you start
Checking completeness of product
Before starting installation check to see whether the packaging of the product is
complete:
1 announcer including these elements (assembled):
2 wall plugs
2 screws for wall plugs
Requirements:
This type of announcer has no specific requirements.
Mounting
The announcer is usually mounted on a wall using the supplied wall plugs and screws.
There is a drilling template on the packaging
Electrical Installation
Connectors
The announcer has one connector for connecting the bus. The second RJ-11 connector
serves for connecting up the earpiece. Both connectors are under the side doors.
Caution
The announcer is not intended for installation outdoors.