2N Lift8 v1.0 - Manual (Page 85)

85
2N TELEKOMUNIKACE a.s., www.2n.cz
®
If you use a USB cable for CU connection, select the USB connection type. The screen
will change and the login name and password will only be visible. Enter the correct
values. Refer to the text below for the default values. Now connect the CU and click
Connect. The
automatically finds the connected CU on the PC 2N Lift8
®
Service Tool
and starts downloading parameters and logs. Having completing the download, the 2N
is ready for work. Lift8
®
Service Tool
Warning
Make sure that the USB port driver for the has 2N Lift8
®
Central Unit
been installed properly on the PC to avoid identification and login failures.
If a problem with non-compatible version of .NET occurs during
installation, you should download new version of .NETFX4.0 from
. From online manual you can use this . www.2n.cz link
Minimum operating system requirements: Windows XP, Vista, 7, 8
Caution
Default values for CU connection:
TCP
Username: Admin
Password: 2n
Port: 7007
USB
Username: Admin
Password: 2n