Connection of bus between splitter and cu – 2N Lift8 v1.0 User Manual
Page 26
Advertising
26
After plugging the
CJ into the socket the LED (Power/battery) should start to flash
(charging). The
charges the rechargeable batteries until fully charged.
CU
After some
time the flashing green LED (charging) should change to a permanently illuminated
green LED (battery charged).
Connection of bus between splitter and CU
We connect the central unit and splitter using the 6-wire main bus (power + - , audio +
- , data + - ). You must maintain the polarity.
Warning
Adhere to the polarity of the rechargeable batteries! When the polarity of
the rechargeable batteries is reversed, there is a danger of their fire or
explosion or damage to the electronics of the central unit.
Advertising