Rockwell Automation 1734-XXXX POINT I/O Digital and Analog Modules and POINTBlock I/O Modules User Manual
Page 132
Advertising
Rockwell Automation Publication 1734-UM001E-EN-P - July 2013
134 Calibrate Your Analog Modules
1. Double-click the icon to bring up the General parameter dialog.
You see the EDS Editor dialog ask you if you want to upload the
configuration from the device.
2. From the EDS Editor dialog, click Upload.
.
3. From the Device Parameters dialog, select Calibration at the Groups
pull-down.
Groups pull-down
Click Calibration.
Advertising